Dahua NVR2104-I2 User Manual

Figure 5-98 Recording information
5.9 AI
AI detection is to process and analyze the image and extract the key information, and then
compare the key information with the preset detection rule. An alarm is triggered when the
detected behavior matches the detection rule.
The following gures are for reference only and might dier from the actual situation.
5.9.1 Overview
AI detection falls into AI by camera and AI by recorder.
●
AI by camera: Some cameras themselves support AI detection. The cameras perform AI
detection and send the detection results to the NVR for display. When using AI by camera, make
sure to connect the Device to the cameras that support the corresponding AI detection
functions.
●
AI by recorder: The cameras send videos to NVR for detection, analysis and result display.
●
Some models support AI by camera only.
●
The AI functions might vary with models.
●
Dierent AI functions might conict with each other. You cannot enable two conicting AI
functions for the same channel.
User's Manual
210

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English