Dahua NVR2104-I2

Figure 5-182 Congure entries frequency
Table 5-51 Entries frequency parameters
Parameter
Description
Statistical Cycle Set the cycle for counting the entries frequency.
Entries Detected
Set the threshold of entries frequency. When the entries detected
reaches or exceeds the threshold, an alarm is triggered.
Alarm Name The name is Entries Frequency by default. You can change the name.
Step 4 Click Apply.
5.9.18 Smart Object Detection
You can congure rules and set parameters. When someone is taking or placing an item in the
monitoring area, an alarm is triggered.
5.9.18.1 Conguring Smart Plan
To use the smart detection function, you need to enable the smart plan rst. For details, see "5.9.2
Smart Plan".
5.9.18.2 Conguring Object Detection
Procedure
Step 1 Select AI > Parameters > Smart Object Detection.
Step 2 Select channel and type, and then click Apply.
The target type includes luggage, bag, box, and non-motor vehicle.
User's Manual
295