Dahua NVR2104-I2 User Manual

6 Web Operation
●
The gures in the Manual are used for introducing the operations and only for reference. The
actual page might be dierent dependent on the model you purchased.
●
The Manual is a general document for introducing the product, so there might be some
functions described for the Device in the Manual not apply to the model you purchased.
●
Besides Web, you can use our Smart PSS to login the device. For detailed information, see Smart
PSS user’s manual.
6.1 Network Connection
Background Information
●
The factory default IP of the Device is 192.168.1.108.
●
The Device supports monitoring on dierent browsers such as Safari, Firefox, Google to perform
the functions such as multi-channel monitoring, PTZ control, and device parameters
congurations.
Procedure
Step 1 Check to make sure the Device has connected to the network.
Step 2 Congure the IP address, subnet mask and gateway for the PC and the Device. For details
about network conguration of the Device, see "5.19.3 Network".
Step 3 On your PC, check the network connection of the Device by using "ping ***.***.***.***".
Usually the return value of TTL is 255.
6.2 Web Login
Procedure
Step 1 Open the browser, enter the IP address of the Device, and then press Enter.
User's Manual
422

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English