Procedure
Step 1 Select Main Menu > ALARM > Thermal Alarm.
Figure 5-193 Thermal alarm
Step 2 Select a channel and set alarm type to heat alarm, and then enable the function.
Step 3 Select re mode. The system supports preset mode and zone excluded mode.
●
Preset mode: Select a preset and then enable the function. The system generates an
alarm once it detects there is a re.
●
Zone excluded mode: The system lters the specied high temperature zone. The
system generates an alarm once the rest zone has re.
Step 4 Congure alarm linkage. For details, see Table 5-47 .
Step 5 Click Apply.
5.10.8 Exception
Background Information
When an error in HDD, network, and device occurs, the system performs alarm linkage actions.
Procedure
Step 1 Select Main Menu > ALARM > Exception.
User's Manual
309
To Next Page
Loading...
