Dahua NVR2104-I2 User Manual

Parameter Description
Disconnect Disconnect the current connection.
Connect Select an available site and then click Connect.
Step 3 Click Apply.
●
After the connection is successful, a Wi-Fi connection signal ag appears in the upper-
right corner of the live view page.
●
The Wi-Fi module models currently supported are D-LINK, dongle and EW-7811UTC
wireless cards.
5.11.5 Wi-Fi AP
Background Information
You can congure Wi-Fi parameters for the NVR to ensure that a wireless IPC can connect to the
NVR through Wi-Fi AP.
This function requires the built-in Wi-Fi module in the Device.
5.11.5.1 General Settings
Background Information
You can congure SSID, encryption type, password and channel of the device.
●
This function is supported on select wireless models.
●
When the wireless IPC and NVR are matched, the pairing will be completed in 120 seconds after
they are powered on.
Procedure
Step 1 Select Main Menu > NETWORK > Wi-Fi AP > General.
User's Manual
319

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English