Dahua NVR2104-I2

5.11.4 External Wi-Fi
The Device can be connected to wireless network with an external Wi-Fi module.
Prerequisites
Make sure that external Wi-Fi module is installed on the Device.
Background Information
This function is available on select models.
Procedure
Step 1 Select Main Menu > NETWORK > Wi-Fi.
Figure 5-201 Wi-Fi
Step 2 Congure the parameters.
Table 5-56 Wi-Fi parameters
Parameter
Description
Connect
Automatically
After the function is enabled, the NVR will connect to the nearest site that
was previously successfully connected after the Device starts.
Refresh Search for the sites again.
User's Manual
318