Figure 5-297 Test
Step 2 In the Destination IP box, enter the IP address.
Step 3 Click Test.
After testing is completed, the test result is displayed. You can check the evaluation for
average delay, packet loss, and network status.
5.19.4 Maintenance and Management
5.19.4.1 Device Maintenance
Background Information
When the Device has been running for a long time, you can enable the Device to restart
automatically at the idle time. You can also enable emergency maintenance.
Procedure
Step 1 Select Main Menu > MAINTAIN > Manager > Maintenance.
User's Manual
410
To Next Page
Loading...
Need help?
General
