Dahua NVR2104-I2

Figure 5-217 Alarm center
Step 2 Click to enable the function.
Step 3 Congure the parameters.
Table 5-66 Alarm center parameters
Parameter
Description
Protocol Type Select a protocol type.
Server Address
The IP address and communication port of the PC installed with alarm
client.
Port
Auto Report Plan Select time cycle and specic time for uploading alarm.
Step 4 Click Apply.
5.11.16 Register
You can register the Device into the specied proxy server which acts as the transit to enable the
client software to access the Device
Prerequisites
●
The proxy server has been deployed.
●
The Device, the proxy server and the device running the client software are on the same
network.
Procedure
Step 1 Select Main Menu > NETWORK > Register.
User's Manual
336