The IP address appears on the PPPoE page. You can use this IP address to access the
Device.
When the PPPoE function is enabled, the IP address on the TCP/IP page cannot be
modiîš‚ed.
5.11.10 DDNS
When the IP address of the Device changes frequently, the DDNS function can dynamically refresh
the correspondence between the domain on DNS and the IP address. You can access the Device by
using the domain.
Prerequisites
Check the type of DDNS that the Device supports and then log in to the website provided by the
DDNS service provider to register domain and other information.
After registration, you can log in to the DDNS website to view the information of all the connected
devices under the registered account.
Procedure
Step 1 Select Main Menu > NETWORK > DDNS.
Figure 5-212 DDNS
Step 2 Enable DDNS and then conîš‚gure the parameters.
After you enable DDNS function, the third-party server might collect your device
information.
Table 5-61 DDNS parameters
Parameter
Description
Type
Displays the type and address of DDNS service provider.
Server Address
User's Manual
328
To Next Page
Loading...
Need help?
General
