Dahua NVR2104-I2 - Page 228

Step 3 Click to enable face detection.
Step 4 Click Setting next to Rule to draw areas to lter the target.
You can congure two target lters (maximum size and minimum size). The system
triggers an alarm when the size of detected target is between the maximum size and the
minimum size.
Step 5 Click Setting next to Schedule to congure the arming period.
The system triggers corresponding alarm actions only during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
Step 6 Congure alarm linkage actions. For details, see Step 7 .
Step 7 Click Apply.
5.9.3.3 AI Search (Face Detection)
Background Information
You can search for the detected faces and play back related recordings.
Procedure
Step 1 Select Main Menu > AI > AI Search > Face Detection.
Figure 5-104 Face search
Step 2 Select the channel, enter the start time and end time, and select the attributes.
Step 3 Click Search.
The results are displayed.
User's Manual
215