Dahua NVR2104-I2 User Manual

Figure 5-109 Add database
Step 3 Select Normal Database from the Type list, and then enter database name.
Step 4 Click OK.
5.9.5.2.2 Creating Remote Face Databases
The Device can get face databases from the remote devices, and also allows creating face databases
for remote devices. The remote device face database is suitable for face recognition by Camera.
Procedure
Step 1 Select Main Menu > AI > Database > Face Database Cong.
Step 2 Select Remote as Type, select a channel and then click Add.
Step 3 Enter database name.
Step 4 Click OK.
5.9.5.2.3 Creating the Passerby Database
Background Information
If you use the passerby database for alarm linkage, when the detected face is not in the face
database, the system automatically captures the face image, and then save it to the passerby
database.
This function is available on select models.
Procedure
Step 1 Select Main Menu > Database > Face Database Cong.
Step 2 Select Local as Type, and then click Add.
You can create only one passerby database.
User's Manual
220

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English