Dahua NVR2104-I2 User Manual

The face images are modeled automatically after added to face database. You can also model
face images manually.
On the Database Cong page, select a database, and then click Modeling to model all the
face images in the database.
On the Details page, select one or more face images, and then click Modeling to model the
selected images.
●
Export face images.
Select one or more face images, and then click Export.
●
Delete face images.
Select one or more face images, and then click Delete.
5.9.5.4 Conguring Face Recognition
Background Information
Congure alarm rules for face recognition.
5.9.5.4.1 Conguring AI by Recorder
Prerequisites
Make sure the face detection function is enabled at corresponding channel.
Procedure
Step 1 Select Main Menu > AI > Parameters > Face Recognition.
Step 2 Select the channel, enable the function, and select AI by Recorder in the Type list.
Figure 5-115 AI by recorder
Step 3 Click Setting next to Schedule to congure arming periods. The corresponding alarm
actions are linked by the alarm events triggered during armed period.
Step 4 Arm target face database.
User's Manual
225

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English