Dahua NVR2104-I2

The system triggers an alarm only when the size of detected target is between the
maximum size and the minimum size.
3. Congure the parameters.
Table 5-33 Intrusion parameters
Parameter Description
Name Customize the rule name.
Action Set the intrusion action, including appear and crossing area.
Direction Set the direction to cross the area, including enter, exit and both.
Target Filter
Click and then select eective target. With Human and Motor
Vehicle selected by default, the system automatically identies the person
and motor vehicle appeared within the monitoring range.
4. Click OK.
Step 6 Congure alarm schedule and linkage.
Figure 5-129 Schedule and alarm linkage
1. Click .
2. Click Setting next to Schedule to congure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3. Congure alarm linkage. For details, see Table 5-47 .
4. Click Apply.
Step 7 Select Enable checkbox and then click Apply.
User's Manual
237