Dahua NVR2104-I2

Figure 5-138 Schedule and alarm linkage
1. Click .
2. Click Setting next to Schedule to congure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3. Congure alarm linkage. For details, see Table 5-47 .
4. Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.6.2.6 Crowd Gathering
Background Information
The system generates an alarm once people are gathering in the specied zone longer than the
dened duration.
Procedure
Step 1 Select Main Menu > AI > Parameters > IVS.
User's Manual
246