Figure 5-143 Missing object
2. Click to draw the minimum size or maximum size to îš‚lter the target.
The system triggers an alarm only when the size of detected target is between the
maximum size and the minimum size.
3. Conîš‚gure parameters.
Table 5-38 Parameters of missing object detection
Parameter
Description
Preset Set the preset point for IVS detection according to the actual needs.
Name Customize the rule name.
Duration Set how long the object stays until the alarm is triggered.
4. Click OK.
Step 6 Conîš‚gure alarm schedule and linkage.
User's Manual
251
To Next Page
Loading...
Need help?
General
