Figure 5-149 Schedule and alarm linkage
1. Click .
2. Click Setting next to Schedule to congure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3. Congure alarm linkage. For details, see Table 5-47 .
4. Click Apply.
Step 6 Click Apply.
5.9.7.2.2 Fall Detection
When someone falls from a height in the detection area and the duration of the action is greater
than the dened threshold, an alarm will be triggered.
Procedure
Step 1 Select Main Menu > AI > Parameters > Stereo Analysis.
Step 2 Select a channel and then click Add.
Step 3 Select Enable and then set Type to Fall Detection.
Step 4 Draw detection rule.
1.
Click
, and then draw a detection area on the video image. Right-click the image to
stop drawing.
2. Congure parameters.
Table 5-41 Parameters of fall detection
Parameter
Description
Name Customize the rule name.
User's Manual
258
To Next Page
Loading...
