Dahua NVR2104-I2

1. Click , and then draw a detection area on the video image. Right-click the image to
stop drawing.
2. Congure parameters.
Table 5-42 Parameters of violence detection
Parameter Description
Name Customize the rule name.
Sensitivity Set alarm sensitivity.
3. Click OK.
Step 5 Congure alarm schedule and linkage.
Figure 5-151 Schedule and alarm linkage
1. Click
.
2. Click Setting next to Schedule to congure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click
to set the period.
3. Congure alarm linkage. For details, see Table 5-47 .
4. Click Apply.
Step 6 Click Apply.
5.9.7.2.4 People No. Exception Detection
When the system detects an abnormal number of people in the same detection area, an alarm will
be triggered.
Procedure
Step 1 Select Main Menu > AI > Parameters > Stereo Analysis.
User's Manual
260