5.9.8.1 Enabling Smart Plan
To use AI by camera, you need to enable the smart plan îš‚rst. For details, see "5.9.2 Smart Plan".
5.9.8.2 Conîš‚guring Video Metadata
When a metadata alarm is triggered, the system links the corresponding camera to record videos
and logs and take snapshots. Other alarm linkage actions are not supported for video metadata.
Procedure
Step 1 Select Main Menu > AI > Parameters > Video Metadata.
Figure 5-155 Video metadata
Step 2 Select a channel and AI type.
AI by Recorder is available on select models.
Step 3 Click Add to add a rule.
Step 4 Select Enable and then set Type to People Detection, Non-motor Vehicle Detection or
Motor Vehicle Detection.
User's Manual
265
To Next Page
Loading...
Need help?
General
