Dahua NVR2104-I2 User Manual

Step 2 Select a channel and then click Add.
Step 3 Select the Enable checkbox and then set Type to In Area No.
Step 4 Draw people counting rule.
1. Click to draw a rule. Right-click the image to stop drawing.
2. Congure the parameters.
3. Click OK.
Step 5 Click and then enable in-area people number alarm and stay alarm.
Step 6 Click under Trigger to congure the alarm schedule and linkage
Step 7 Click Apply.
5.9.11.4 Queuing
Background Information
After conguring queuing alarm, the system can realize the corresponding linkage actions once the
number of people in the queue or the waiting time has triggered an alarm.
Procedure
Step 1 Select Main Menu > AI > Parameters > People Counting > Queuing.
Figure 5-169 Queuing
Step 2 Select a channel, and then click Add.
Step 3 Select the Enable checkbox.
Step 4
Click to draw queuing rule and area.
Step 5
Click under Parameters , and then enable Queue People No. Alarm or Queue Time
Alarm.
Step 6
Click under Trigger to congure alarm schedule and linkage.
Step 7 Click Apply.
User's Manual
280

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English