Dahua NVR2104-I2 User Manual

You can congure IP address, subnet mask, default gateway, DHCP server of the Device.
Procedure
Step 1 Select Main Menu > NETWORK > Wi-Fi AP > Advanced.
Figure 5-203 Advanced settings
Step 2 Congure parameters.
Table 5-58 Parameters of advanced settings
Parameter
Description
IP Address Set IP address, subnet mask and default gateway for the Wi-Fi of NVR.
IP address and default gateway must be on the same network segment.
Subnet Mask
Default Gateway
Start IP
Set the start IP address and end IP address of the DHCP server.
End IP
Preferred DNS
Set preferred and alternate DNS server address.
Alternate DNS
Step 3 Click Apply.
User's Manual
321

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English