Dahua NVR2104-I2

Figure 5-244 Add user
Step 3 Congure the parameters.
Table 5-73 Parameters of adding user
Parameter
Description
Username
Enter a username and password for the account.
Password
Conrm Password Enter the password again to conrm it.
Remarks
Optional.
Enter a description of the account.
User MAC Enter user MAC address
Group
Select a group for the account.
The user rights must be within the group permissions.
Period
Click Setting to dene a period during which the new account can log in
to the Device. The new account cannot access the device during other
periods.
Permission
Select the checkboxes to grant permissions to the user.
To manage the user account easily, when dening the user account
permission, do not give the authority to the common user account higher
that the advanced user account.
Step 4 Click OK.
User's Manual
360