Procedure
Step 1 Select Main Menu > SYSTEM > General > Basic.
Figure 5-272 Basic settings
Step 2 Set parameters.
Table 5-79 Basic parameters
Parameter
Description
Device Name Enter the Device name.
Device No. Enter a number for the Device.
Language Select a language for the Device system.
Video Standard Select PAL or NTSC as needed.
Sync Remote Device
Enable this function; the NVR can synchronize information with the
remote device such as Language, video standard and time zone.
Instant Playback
In the Instant Play box, enter the time length for playing back the
recorded video. The value ranges from 5 to 60.
On the live view control bar, click the instant playback button to play
back the recorded video within the conîš‚gured time.
Logout Time
Enter the standby time for the Device. The Device automatically logs
out when it is not working in the conîš‚gured period. You need to login
the Device again.
The value ranges from 0 to 60. 0 indicates there is not standby time for
the Device.
User's Manual
384
To Next Page
Loading...
Need help?
General
