Procedure
Step 1 Select Main Menu > DISPLAY > Display.
Figure 5-277 Display
Step 2 Congure the parameters.
Table 5-82 Display parameters
Parameter
Description
Main Screen/Sub
Screen
Congure the output port format of both screens.
●
When sub screen is disabled, the format of main screen is HDMI/VGA
simultaneous output.
●
When sub screen is enabled, the format of main screen and sub screen
are non-simultaneous outputs.
When output port of sub screen is set to HDMI , the output port of
main screen is set to VGA by the device.
When output port of sub screen is set to VGA , the output port of
main screen is set to HDMI by the device.
Enable Decoding After it is enabled, the device can normally decode.
Time Title/Channel
Title
Select the checkbox and the date and time of the system will be displayed
in the preview screen.
Transparency
Set the transparency of the local menu of the NVR device. The higher the
transparency, the more transparent the local menu.
Time Title/Channel
Title
Select the checkbox and the date and time of the system will be displayed
in the preview screen.
Image Enhancement Select the checkbox to optimize the preview image edges.
SMD Preview Select the checkbox to display the SMD previews in the live view page.
AI Rule Select the checkbox to display the AI rules in the live view page.
User's Manual
390
To Next Page
Loading...
Need help?
General
