●
Do not place the Device in a place exposed to sunlight or near heat sources.
●
Keep the Device away from dampness, dust, and soot.
●
Put the Device in a well-ventilated place, and do not block its ventilation.
●
Install the Device on a stable surface to prevent it from falling.
●
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the device label.
●
The device is a class I electrical appliance. Make sure that the power supply of the Device is
connected to a power socket with protective earthing.
●
Use power cords that conform to your local requirements, and are rated specications.
●
Before connecting the power supply, make sure the input voltage matches the power
requirements of the Device.
●
When installing the Device, make sure that the power plug and appliance coupler can be easily
reached to cut o power.
●
Install the Device near a power socket for emergency disconnect.
●
It is prohibited for non-professionals and unauthorized personnel to open the Device casing.
User's Manual
V
To Next Page
Loading...
Need help?
General
