1.1 Features 173
intelligent Manager
˚C
Cooling
Setpoint
Heating
SetPoint
Heating
Heating
Cooling
HeatingCooling
Heating
Time
Cooling
Temp Difference
Change Set Point
Change Set Point
· Flexible group configuration
· 3 selection methods
· Flexible group configuration
Room
Temp
Max
Start Heating
Stop Heating
Time
Stop Cooling
Min
Min
+
4
˚C
Max
4
˚C
Room Temperature is
maintained within
the range
Heating
Mode
Cooling
Mode
Max
Max Outdoor temp
Set temp
Min
Min
Set temp
· Flexible group configuration
Remote control operation can be disabled for specific air
conditioner units. This can prevent trouble arising from
pranks or setting errors in locations such as school class-
rooms or entrance lobbies and other public areas.
The Manager measures room temperature
and can automatically change over between cooling and
heating modes. This provides comfort by enabling selec-
tion of the appropriate mode and takes the human factor
out of changeovers.
intelligent Manager can monitor the outdoor temperature
and automatically adjust room temperature to minimise
drastic temperature differences with the outdoors.
Along with energy efficiency, intelligentManager also can
eliminate any uncomfortable cold shock around building
entrances and the like.
Note: Optional D -Ai unit required
DAM101A51
intelligentManager allows users to put limitations on the
maximum and minimum temperatures and realise an
appropriate room temperature via automatic control. Fur-
thermore eliminates any unnecessary and excessive op-
eration that may result in overcooling or overheating.
Automatic change over Temperature limit
Remote controller restriction Sliding temperature
Start Cooling
To Next Page
Loading...
