296 1.4 <DTA109A51> DIII-NET Expander Adaptor
Adaptor
1.4.2 Part Name and Functions
1P013360
1.4.3 Installation
X1M
F2
→
→
To adaptor power supply
connecter on outdoor unit
F1
Power supply connector
{
Wiring for transmission
(F1,F2)
To terminal block of branched
outdoor unit.
(branch line)
See Electric wiring work
Microcomputer normal monitor
(HAP : GRN)
Flickers when the microcomputer is
operating normally.
Terminal block for
transmission
See Electric wiring
work
lnstallation Manual
adaptor
F2
Check the following accessories are included in the kit before the installation
PC board support
This adaptor does not apply to salt damege resistsnce.
NOTE
TES1
F1
Accessories
Clamp
×1
× 4
× 3
× 1
To Next Page
