354 2.7 <KRP1B61 / KRP1B56, 59 / KRP1C3> Adaptor for Wiring
Adaptor
z Installation differs according to models as shown below.
z Do not bundle low and high voltage wires together.
z Bundle any access wires with the attached clamps so as to keep loose wirings off the indoor unit PC board
Ceiling mounted cassette type Ceiling mounted built-in type
Ceiling mounted duct type
Ceiling mounted low silhouette duct type Floor-standing type
Ceiling mounted cassette type
Adaptor
(KRP1B61)
Indoor PC board
PC board
support
Electric parts box
Adaptor
(KRP1B61)
(Corner model)
FXK (Q)
PC board support
Adaptor
(KRP1B61)
Indoor PC board
Electric parts box
FXS (Q)
FXYB
Note: Installation box is necessary for second adaptor (FXS).
PC board support
Electric parts box
Indoor PC board
Adaptor
(KRP1B61)
FXM (Q) 40~125
PC board support
Indoor PC board
Adaptor
(KRP1B61)
Electric parts box
FXM (Q) 200 · 250
Electric
parts box
PC board
support
Indoor PC board
Adaptor
(KRP1B61)
FXL (Q)
FXN (Q)
NOTE) A separate plate is needed to install the adaptor PC board.
(Double-flow model)
FXC (Q)
PC board support
Installation
screw
Electric
parts box
Indoor PC board
Adaptor
(KRP1B61)
Plate for adaptor
PC board
(option KRP1B96)
To Next Page
Loading...
