Danfoss iC7-Automation - Locating Support Information; Version History; Abbreviations

1.3.2 Locating Support Information
Additional information is available on the company website.
1. Go to https://www.danfoss.com.
2. Select Products.
3. Select Drives.
4. Select the product series, for example Low-voltage drives or System modules.
5. Select the product series (for example, iC7).
Ü
The browser opens the product page, which provides links to documents, drawings, and software of the product.
1.4 Version History
This guide is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this guide is English.
Table 1: Version History
Version Remarks
A Design guide created based on the previous operating guide 139Z8096.
1.5 Abbreviations
Table 2: Abbreviations, Acronyms, and Symbols
Term Definition
AC Alternating current
AFE Active front end
AI Analog input
AO Analog output
AWG American wire gauge
DC Direct current
DI Digital input
DO Digital output
EMC Electromagnetic compatibility
EN European standards
GND Ground
LHD Low-harmonic
I Current
IEC International Electrotechnical Commission
INU Inverter
10 | Danfoss Drives Oy © 2024.09 AJ389643274589en-000101 / 172F6409A
Design Guide | iC7-Automation Air-cooled Enclosed Drives Introduction