Danfoss iC7-Automation - Description of the Frame Designation; Weights

To Next Page

To Previous Page

Design Guide | iC7-Automation Air-cooled Enclosed Drives Product Overview

1 Charging circuit 2 Air circuit breaker

3 Mains terminals 4 AC fuses

5 PE busbar 6 Inlet air grill

7 Control cable grommet, top 8 DC fuses, behind the touch protection plate

9 Control compartment 10 Motor terminals

11 Motor fan control/supply terminals (+ICFI1-4), Auxiliary AC

supply terminals (+IHAS), behind PE busbar

12 IP54 grommet for mains cables (IEC)

13 IP54 grommet for motor cables (IEC) 14 Control cable grommet, bottom

4.3 Description of the Frame Designation

A frame designation is used to refer to different types of iC7 series drives. The frame designation describes the function, mechanical

variant, and size of the drive.

Example

The frame designation can have this format, for example:

AE11

Table 4: Description of the Frame Designation

Code Description

A Function

F = 6-pulse frequency converter

A = Active front end

I = Inverter

E Mechanical variant

E = enclosed drive

11 Size

9, 10, or 11

4.4 Weights

Table 5: Weights of the Enclosed Drives (Drive + Cabinet)

Product Weight [kg] Weight [lb]

FE9 305 672

FE10 420 926

AE10 + IE10 690 1520

AE11 + IE11 980 2160

2 x AE10 + 2 x IE10 1580 3480

2 x AE11 + 2 x IE11 1920 4230

Related product manuals