Design Guide | iC7-Automation Air-cooled Enclosed Drives Contents
Contents
1 Introduction
1.1 Purpose of this Design Guide 9
1.2 Additional Resources 9
1.3 Planning and Design Support Materials 9
1.3.1 Overview 9
1.3.2 Locating Support Information 10
1.4 Version History 10
1.5 Abbreviations 10
1.6 Recommended Disposal 11
2 Safety
2.1 Safety 12
2.2 Safety Symbols 12
2.3 General Safety Considerations 12
2.4 Target Group and Necessary Qualifications 13
3 Danfoss iC7 Series
3.1 Overview of iC7 Series 15
4 Product Overview
4.1 The Air-cooled Enclosed Drives 16
4.2 Interior Views of the Products 16
4.2.1 Interior View of the Cabinet, FE9 16
4.2.2 Interior View of the Cabinet, FE10 18
4.2.3 Interior View of the Cabinet, AE10 + IE10 20
4.2.4 Interior View of the Cabinet, 2 x AE10 + 2 x IE10 22
4.2.5 Interior View of the Cabinet, AE11 + IE11 23
4.2.6 Interior View of the Cabinet, 2 x AE11 + 2 x IE11 24
4.3 Description of the Frame Designation 25
4.4 Weights 25
4.5 Description of the Model Code 26
4.6 Product Label 26
4.7 Labels on the Power Units 27
Danfoss Drives Oy © 2024.09 AJ389643274589en-000101 / 172F6409A | 3
To Next Page
Loading...
