Design Guide | iC7-Automation Air-cooled Enclosed Drives Introduction
1 Introduction
1.1 Purpose of this Design Guide
This design guide is intended for qualified personnel, such as:
l Project and systems engineers.
l Design consultants.
l Application and product specialists.
The design guide provides technical information to understand the capabilities of the iC7 drives for integration into motor control and
monitoring systems. Its purpose is to provide design considerations and planning data for integration of the drive into a system. It caters
for selection of drives and options for a diversity of applications and installations. Reviewing the detailed product information in the
design stage enables developing a well-conceived system with optimal functionality and efficiency.
This guide is targeted at a worldwide audience. Therefore, wherever occurring, both SI and imperial units are shown.
1.2 Additional Resources
Additional resources are available to help understand the features, and safely install and operate the iC7 products:
l Safety guides, which provide important safety information related to installing iC7 drives.
l Installation guides, which cover the mechanical and electrical installation of drives, or functional extension options.
l Operating guides, which include instructions for control options, and other components for the drive.
l Application guides, which provide instructions on setting up the drive for a specific end use. Application guides for application
software packages also provide an overview of the parameters and value ranges for operating the drives, configuration examples
with recommended parameter settings, and troubleshooting steps.
l Facts Worth Knowing about AC Drives, available for download on
www.danfoss.com.
l Other supplemental publications, drawings, and guides are available at
www.danfoss.com.
Latest versions of Danfoss product guides are available for download at
https://www.danfoss.com/en/service-and-support/
documentation/.
1.3 Planning and Design Support Materials
1.3.1 Overview
Danfoss provides access to comprehensive product information that supports throughout the product lifecycle.
All iC7 series design guides, installation guides, safety guides, operating guides, and application guides are available for download at
https://www.danfoss.com. It is also possible to order printed guides.
For each iC7 drive or power converter, 2D and 3D drawings, and wiring diagrams are available in standard file formats. EPLAN files with
macros, technical data, and 3D models are also provided to support in the system design.
Configuration files for drives or power converters are also available. MyDrive® Suite provides tools that support the entire lifecycle of the
product, from system design to service. MyDrive® Suite is available at
https://suite.mydrive.danfoss.com/.
The product configurator helps in the product selection, and when the process has been completed, the tool provides a list of relevant
documentation and accessories.
Detailed product information can also be accessed by reading the 2D code on the product label.
Danfoss Drives Oy © 2024.09 AJ389643274589en-000101 / 172F6409A | 9
To Next Page
Loading...
