Design Guide | iC7-Automation Air-cooled Enclosed Drives Mechanical Installation
Figure 18: Installing the Back-channel Cooling Option Cover Plate
1 The cover plate 2 The top hood
2. Place the top hood on top of the cabinet.
3. Place the brackets so that they press the sides of the top hood down.
a. Attach each bracket with 4 screws.
The brackets are identical, each with 6 mounting holes.
Figure 19: Installing the Back-channel Cooling Option Brackets
1 The brackets 2 The top hood
4. Attach a duct against the top hood to direct the airflow.
Danfoss Drives Oy © 2024.09 AJ389643274589en-000101 / 172F6409A | 37
To Next Page
Loading...
