Danfoss iC7-Automation

To Next Page

To Previous Page

Design Guide | iC7-Automation Air-cooled Enclosed Drives Contents

7.3 Control Compartment Internal Elements 50

7.4 Control Compartment Connections 53

7.5 Star Coupler Board 54

7.6 I/O and Relay Option Connections 56

7.7 I/O and Relay Option Interface 59

7.7.1 Analog Inputs 59

7.7.2 Analog Outputs 60

7.7.3 Digital Inputs 60

7.7.4 Digital Outputs 61

7.7.5 Relay Outputs 61

7.7.6 Analog Reference Voltage Output 62

7.7.7 24 V DC Voltage Output 62

7.7.8 Thermistor Input 63

7.8 Control Cable Routing 63

7.9 Installing Boards to the Modular Control Unit 66

7.10 Installing the Control Cables 67

7.10.1 Requirements for the Control Cables 67

7.10.2 Installing the Control Cables 67

8 Maintenance

8.1 Preventive Maintenance Recommendations 71

8.2 Using the Product Modified Label 73

8.3 Replacing the RTC Battery 73

8.4 Cleaning or Replacing the Door Filters 74

9 Specifications

9.1 Tightening Torques 76

9.2 Dimension Illustrations 77

9.2.1 Dimensions of the Enclosed Drive, FE9 77

9.2.2 Dimensions of the Enclosed Drive, FE10 78

9.2.3 Dimensions of the Enclosed Drive, AE10, AE11, IE10, IE11 79

9.2.4 Dimensions for Default Cooling, FE9 81

9.2.5 Dimensions for Default Cooling, FE10 82

9.2.6 Dimensions for Default Cooling, AE10, AE11, IE10, IE11 83

9.2.7 Dimensions for Back-channel Cooling Option, FE9 84

Danfoss iC7-Automation - Page 5