Danfoss VACON NXP IP00 User Manual

8.7.9.3
8.7.9.4
8.7.9.5
8.7.9.6
8.7.9.7
8.7.9.8
8.7.9.9
8.7.9.10
8.8
8.8.1
8.8.2
8.8.3
8.9
9
9.1
9.2
9.3
9.3.1
9.3.2
9.3.3
9.4
9.4.1
9.4.2
9.4.2.1
9.4.2.2
9.4.3
9.4.4
9.5
10
10.1
10.2
11
11.1
11.2
11.3
11.4
Trip Counters (S6.8.2) 105
Resetting the Trip Counters 105
Software (S6.8.3) 106
Applications (S6.8.4) 106
Examining the Application Page 106
Hardware (S6.8.5) 106
Checking the Status of an Option Board 107
Debug Menu (S6.8.7) 107
Using the Expander Board Menu 107
Expander Board Menu 107
Examining the Connected Option Boards 107
Finding the Option Board Parameters 108
Further Control Panel Functions 108
Commissioning 109
Safety Checks before Starting the Commissioning 109
Commissioning the AC Drive 109
Measuring the Cable and Motor Insulation 110
Insulation Checks of the Motor Cable 110
Insulation Checks of the Mains Cable 110
Insulation Checks of the Motor 111
Checks after Commissioning 111
Testing the AC Drive after Commissioning 111
RUN Test without Load 111
Test A: Controls from the Control Terminals 111
Test B: Control from the Keypad 112
Start-up Test 112
Identification Run 112
Motor Run Checklist 112
Maintenance 113
Preventive Maintenance Recommendations 113
Reforming the Capacitors 115
Fault Tracing 117
General Information on Fault Tracing 117
Resetting a Fault 117
Creating Service Info File 117
Error Message on Control Panel Display 118
AQ351737303996en-000201/DPD00888 | 7Danfoss A/S © 2023.09
Contents
VACON® NXP IP00 Drive Modules
Operating Guide

Danfoss VACON NXP IP00 Specifications

General

Brand	Danfoss
Model	VACON NXP IP00
Category	Control Unit
Language	English