To Next Page

To Previous Page

Enter/Exit Programming Mode

100

PowerScan™ PD9330/PBT9300/PM9300

Code 39 Set Length 1

This feature specifies one of the bar code lengths for Code 39 Length Con-

trol. Length 1 is the minimum label length if in Variable Length Mode, or the

first fixed length if in Fixed Length Mode. Length includes

the bar code’s

data characters only. The length can be set from 0 to 50 characters.

Table 4 provides examples for setting Length 1. See page 266 for detailed

instructions on setting this feature.

Table 4. Code 39 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 39 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC3L1

Select Code 39 Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start

again at the beginning.

CANCEL

DEFAULT

02 = Length 1 is 2 Characters

Datalogic PD9330 User Manual

Other manuals for Datalogic PD9330