Datalogic PD9330 User Manual

Enter/Exit Programming Mode
Product Reference Guide 225
Changing System Speed
1. Link the PM9300 with a BC9xxx Base.
2. With the PM9300, read a New System Speed programming label.
3. Place the PM9300 into the BC9xxx.
Normal Mode: Low Speed (1)
Normal Mode: High Speed (3)
DEFAULT
The Reader and Base will now be linked at the new programmed speed.
This feature can also be progra
mmed using Datalogic Aladdin.
1. On the BC9xxx Base, change the System Speed.
2. Place an unlinked PM9300 onto the BC9xxx base.
The Reader and base will link at the new programmed speed.
CAUTION
Restore Default command does not modify this parameter.

Datalogic PD9330 Specifications

General

Brand	Datalogic
Model	PD9330
Category	Barcode Reader
Language	English