Datalogic PD9330 - Standard 2 of 5; Standard 2 of 5 Check Character Calculation; Standard 2 of 5 Enable;Disable

Enter/Exit Programming Mode
Product Reference Guide 131
STANDARD 2 OF 5
The following options apply to the Standard 2 of 5 symbology.
Standard 2 of 5 Enable/Disable
When disabled, the reader will not read Standard 2 of 5 bar codes.
DEFAULT
Standard 2 of 5 = Disable
$C SEN (CR)
Standard 2 of 5 = Enable
Standard 2 of 5 Check Character Calculation
This setting has no effect for AR models.
This option enables/disables calculation and verification of an optional
Sta
ndard 2 of 5 check character.
DEFAULT
$
Standard 2 of 5 Check Character Calculation = Disable
Standard 2 of 5 Check Character Calculation = Enable