Enter/Exit Programming Mode
Product Reference Guide
107
Code 128 Sub-Code Exchange Transmission
This setting has no effect for AR models.
Enables/disables the transmission of “Sub-Code Exch
ange” characters (NOT
transmitted by standard decoding).
DEFAULT
Code 128 Sub-Code Exchange Transmission = Disable
Code 128 Sub-Code Exchange Transmission = Enable
Code 128 Quiet Zones
This setting has no effect for AR models.
This feature specifies the number of quiet zones for Code 128 labels. Quiet
zon
es are blank areas at the ends of a bar code and are typically 10 times
the width of the narrowest bar or space in the label.
Code 128 Quiet Zones = No Quiet Zones
Code 128 Quiet Zones = Quiet Zone on one side
Code 128 Quiet Zones = Quiet Zones on two sides
Code 128 Quiet Zones = Auto
Code 128 Quiet Zones = Virtual Quiet Zones on two sides
To Next Page
Loading...
Need help?
General
