Datalogic PD9330 - Standard 2 of 5 Check Character Transmission; Standard 2 of 5 Minimum Reads

Enter/Exit Programming Mode
132 PowerScan™ PD9330/PBT9300/PM9300
Standard 2 of 5 Check Character Transmission
This setting has no effect for AR models.
This feature enables/disables
transmission of an optional Standard 2 of 5
check character.
$
Standard 2 of 5 Check Character Transmission =
Don’t Send
Standard 2 of 5 Check Character Transmission = Send
DEFAULT
Standard 2 of 5 Minimum Reads
This setting has no effect for AR models.
This feature specifies the minimum number of consecutive times a Standard
2
of 5 label must be decoded before it is accepted as good read.
Standard 2 of 5 Minimum Reads = 1
Standard 2 of 5 Minimum Reads = 2
DEFAULT
Standard 2 of 5 Minimum Reads = 3
Standard 2 of 5 Minimum Reads = 4