Enter/Exit Programming Mode
Product Reference Guide
77
CODE EAN/UPC
Coupon Control
This setting has no effect for AR models.
This feature is used to control the reader’s method of processing coupon
la
bels.
Options are:
• Allow all — allow all coupon
bar codes to be decoded
• Enable only UPC/EAN — enables only UPC/EAN coupon decoding
• Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
To set this feature:
1. Scan the Enter/Exit bar
code.
2. Scan either the enable or disable bar code below. You’
ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner sees only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit bar
code.
$CCPCL00
Coupon Control = Allow all
$CCPCL01
Coupon Control = Enable only UPC/EAN
DEFAULT
$CCPCL02
Coupon Control = Enable only GS1 DataBar
To Next Page
Loading...
Need help?
General
