To Next Page

To Previous Page

Enter/Exit Programming Mode

214

PowerScan™ PD9330/PBT9300/PM9300

Bluetooth Security Mode

This feature enables/disables authentication and encryption of the Blue-

tooth link. Use the feature "Bluetooth PIN Code" on

page 214 to specify the

length and digits in the PIN code used to

authenticate the Bluetooth Link.

DEFAULT

$CBTSE00(CR)

Bluetooth Security Mode = Disable

$CBTSE01(CR)

Bluetooth Security Mode = Enable

Changing the security mode setting will unlink the devices. If the Automatic

Configuration Update is set to the default “Enabled” setting, the devices must

only be relinked. If the Automatic Configuration Update is set to “Disabled,”

the Security Mode setting must also be updated in the Base Station using

Aladdin. After the Base Station has been updated, the devices must be

relinked.

Bluetooth PIN Code

After enabling Security Mode (see "Bluetooth Security Mode" on page 214),

specify whether you want to set a 4-digit or a 16-digit PIN Code. See

page 281 for detailed information and examples for setting this feature.

$CBTPS00\r

Select 4-character Bluetooth PIN Code

DEFAULT

~$CBTPS01\r

Select 16-character Bluetooth PIN Code

Select PIN Code Length

Datalogic PD9330 User Manual

Other manuals for Datalogic PD9330