Datalogic PD9330 User Manual

Product Reference Guide 301
Appendix C
Standard Defaults
The most common configuration settings are listed in the “Default” col-
umn of the table below. Page references are also provided for feature
descriptions and programming bar codes for each parameter. A column
has also been provided for recording of your preferred default settings
for these same configurable features.
Table 52. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 23
Disable 23
RS-232 ONLY
Baud Rate
115200 26
Data Bits
8 Data Bits 27
Stop Bits
1 Stop Bit 27
Parity
None 27
Handshaking Control
RTS 28
RS-232/USB-Com
Intercharacter Delay
No Delay 30
Beep On ASCII BEL
Disable 30
Beep On Not on File
Enable 31
ACK NAK Options
Disable 31
ACK Character
‘ACK’ 32
NAK Character
‘NAK’ 32
ACK NAK Timeout Value
200 ms 33
ACK NAK Retry Count
3 Retries 33
ACK NAK Error Handling
Ignore Errors Detected 34

Datalogic PD9330 Specifications

General

Brand	Datalogic
Model	PD9330
Category	Barcode Reader
Language	English