Datalogic PD9330 - Bluetooth Reconnect Attempt Mode; HID Country Mode

Enter/Exit Programming Mode
220 PowerScan™ PD9330/PBT9300/PM9300
Bluetooth Reconnect Attempt Mode
Enable/Disable reconnection by trigger pull.
$CBTRM00(CR)
Bluetooth Reconnect Attempt Mode = Disable
$CBTRM01(CR)
Bluetooth Reconnect Attempt Mode = Enable
DEFAULT
HID Country Mode
When the Reader is connected with a Bluetooth Adapter in HID mode, you
may want to set the country for which your PC is localized. In order to do
that, read one of the configuration command labels below.
Country Mode = U.S.
DEFAULT
Country Mode = Belgium
Country Mode = Britain
Country Mode = Croatia