Datalogic PD9330 - Codablock F; Codablock F AIM Check; Codablock F EAN Enable;Disable; Codablock F Enable;Disable

Product Reference Guide 173
CODABLOCK F
This setting has no effect for AR models.
The following options apply to the Codablock F symbology.
Codablock F Enable/Disable
Enables/Disables ability of reader to decode Codablock F labels.
DEFAULT
Codablock F = Disable
Codablock F = Enable
Codablock F EAN Enable/Disable
This setting has no effect for AR models.
Enables/Disables the Codablock F EAN subtype (code with FNC1 in the first
pos
ition).
DEFAULT
Codablock F EAN = Disable
Codablock F EAN = Enable
Codablock F AIM Check
This setting has no effect for AR models.
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F AIM Check = Not AIM compliant
Codablock F AIM Check = AIM compliant
DEFAULT