Datalogic PD9330 - I 2 of 5 Decoding Level

Enter/Exit Programming Mode
118 PowerScan™ PD9330/PBT9300/PM9300
I 2 of 5 Decoding Level
This configuration item applies to Interleaved 2 of 5, Datalogic 2 of 5
and Standard 2 of 5.
This setting has no effect for AR models.
Decoding Levels are used to configure
a bar code symbology decoder to be
very aggressive to very conservative depending on a particular customer’s
needs. See "Decoding Levels" on page 239 for more detailed programming
instructions.
$CI2CT0
2 of 5 Decoding Level = Disabled
2 of 5 Decoding Level = 1
$
2 of 5 Decoding Level = 2
2 of 5 Decoding Level = 3
DEFAULT
$
2 of 5 Decoding Level = 4
2 of 5 Decoding Level = 5