Technical Specifications
288
PowerScan™ PD9330/PBT9300/PM9300
PBT9300 and PM9300 models
Battery Type Li-Ion battery pack
Charge time for full
charge
from full dis-
charge
4 hours with external power supply adapter
a
Typical 10 hours with Host power (in this case no supply adapter is needed)
a
Operating autonomy
(continuous reading)
50,000 reads (typical)
Cradle consumption and
DC
input supply range
Volt 10-30 VDC; Power <8W
b
;
Max 500 mA when in host/bus powered mode
b
.
Performance Characteristics
Light Source Laser
PX9300-XX PX9300-XXAR
Roll (Tilt) Tolerance ± 35° ± 10°
Pitch Tolerance ± 40° ± 60°
Skew (Yaw) Tolerance ± 65° ± 65°
Print Contrast
Minimum
25% minimum reflectance
Resolution 3 mils 7.5 mils
Scan Rate 104 (± 12) scans / sec 35 (± 5) scans / sec
Scan Angle 47° max 13.5° (± 0.7°) max
a. Charge Times are much lower when battery is within daily typical operating condition.
b. Typical input current measured under factory default configuration.
Item Description
Depth of Field (Typical)
Symbology PX9X00-XX
Code 39
5 mils 1.5 - 28 cm / 0.6 - 11’’
7.5 mils 1.5 - 42 cm / 0.6 - 16.5’’
10 mils 2 - 50 cm / 0.8 - 19.7’’
20 mils 2 - 110 cm / 0.8 - 43.3’’
40 mils 2 - 160 cm / 0.8 - 63’’
EAN 13 2.5 - 65 cm / 1 - 25.6’’
Symbology PX9X00-XXARXX
To Next Page
Loading...
Need help?
General
