INFO
This only applies to the selected function and does not apply other I/O change(s).
7. The added function is shown on the screen:
•
¨
Edit a function or clear function
1. You can re-edit the selected function, by pressing OK .
• The function is shown on the screen:
•
2. To clear all the Enabled function, select Clear
.
3. To save the settings to the controller, select Write
.
INFO
This only applies to the selected functions and does not apply other I/O change(s).
• The terminal(s) settings are now shown on the screen.
PPM 300 Operator's manual 4189340910 UK
www.deif.com Page 103 of 157
To Next Page
Loading...
