Dell 2155cn - When Using the Operator Panel

104 Setting the IP Address
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section08.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
3 Click IP Configuration .
4 Follow the instructions displayed on the screen.
When Using the Operator Panel
For more information on using the operator panel, see " Operator Panel. "
1
Turn on the printer.
2 Press the (Menu) button.
3 Press button until System Setup is highlighted, and then press the
(Set) button.
4 Press button until Admin Menu is highlighted, and then press the
(Set)
button.
5 Press button until Network is highlighted, and then press the (Set)
button.
6 Press button until TCP/IP is highlighted, and then press the (Set)
button.
7 Press button until IPv4 is highlighted, and then press the (Set)
button.
8 Ensure that Get IP Address is highlighted, and then press the (Set)
button.
9 Press button until Panel is highlighted, and then press the (Set)
button.
Downloaded from ManualsPrinter.com Manuals