Dell 2155cn - Sending the Scanned File on the Network; Scanning to a USB Memory

368 Scanning
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section19.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
Sending the Scanned File on the Network
1 Load the document(s) facing up with top edge in first into the ADF.
OR
Place a single document facing down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document."
2 Press the (Scan) button.
3 Press button until Scan to Network is highlighted, and then press
the
(Set) button.
4 Ensure that Scan to is highlighted, and then press the (Set) button.
5 Press button until the desired address book is highlighted, and then press
the
(Set) button.
Network(Computer) : Stores the scanned image on the computer by
using the SMB protocol.
Network(Server) : Stores the scanned image on the server by using the
FTP protocol.
Search Address Book : Searches a network address from the Address
Book.
NOTE: The network addresses need to be registered before you can select
Network(Computer) or Network(Server)on the operator
panel.
6 Press button until the desired destination is highlighted, and then press
the
(Set) button.
7 Specify the scan options such as file format, color mode, resolution, and
document size. For details, see "File Format."
8 Press the (Start) button to begin sending the scanned files.
Scanning to a USB Memory
The Scan to USB Memory feature allows you to store scanned image directly to
a USB memory attached to the printer without using software.
Downloaded from ManualsPrinter.com Manuals