Dell 2155cn - SSF Paper Type

318 Copying
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section18.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
* Denotes the factory default setting.
5 Press the (Start) button to begin copying.
SSF Paper Type
To select the default paper type of the single sheet feeder:
NOTE: This setting is only available when the SSF is selected for the paper tray.
1 Load the document(s) facing up with top edge in first into the ADF.
OR
Place a single document facing down on the document glass, and close the
document cover.
For details about loading a document, see "Making Copies From the
Document Glass" and "Making Copies From the ADF."
2 Press the (Copy) button.
3 Press button until SSF Paper Type is highlighted, and then press the
(Set) button.
4 Press or button until the desired setting is highlighted, and then press
the
(Set) button.
A4 (210 x 297 mm)*
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.3 x 10.5")
Envelope #10 (4.1 x 9.5")
Monarch Env. (3.9 x 7.5")
DL Env. (110 x 220 mm)
C5 Env. (162 x 229 mm)
Plain*
Downloaded from ManualsPrinter.com Manuals